Page 1 of 1

Qbittorrent "not responding" after modifying parameter "Asynchronous I/O threads".

Posted: Sat Jun 04, 2022 5:35 pm
by Robertomcat
Hello, good afternoon.

Version 4.4.3.1 qt6
Windows Server 2016

I have changed the processor to the server, and previously in the advanced configuration, in the asynchronous threads section I had the number 20, but now I have incorporated a 14c 28t processor and I have changed the numbering of the asynchronous threads to 112, since according to the documentation it would be multiplying 28 × 4.

When I made the change, the client started to work very badly, and I finally had to shut it down. Afterwards, I started it again and now it has a white screen indicating "no response" and it does not advance in any way.

Then I paid for it again and went to the file where all the qbittorrent configuration is and I put the 20 I had from the beginning with Notepad+, but it still won't start.

I currently have 2200 torrents, and I don't know if there has been any conflict when I changed this parameter due to the large amount of torrents I have.

Could someone give me a hand to solve it? Thanks.

Re: Qbittorrent "not responding" after modifying parameter "Asynchronous I/O threads".

Posted: Sun Jun 05, 2022 9:50 am
by Robertomcat
I have noticed that the background files are still connected in the trackers, only the qbittorrent GUI screen goes completely white at startup indicating "not responding".

Re: Qbittorrent "not responding" after modifying parameter "Asynchronous I/O threads".

Posted: Sun Jun 05, 2022 5:40 pm
by Robertomcat
In the end I was able to solve it, by trial and error.

The problem was in the qbittorrent configuration file.

To have a completely new file, and installed qbitt on another computer, so I could modify the root configuration file.
I then made a copy of the qbitt folders in Local and Roaming. Once everything was secured, I took the original configuration file and changed it for the virgin one, and I have been incorporating data from the original file until I finally solved it.

Having the virgin file, I have been able to solve the error by copying and pasting only all the data from the BitTorrent section, then everything started correctly with the settings, the only thing is that the visible settings of the graphical interface have started by default, but that does not generate absolutely no problem, the custom sections are put back and that's it.