Page 1 of 2
qBittorrent for WD My Cloud
Posted: Thu Jul 10, 2014 10:08 am
by kpyhere
Hello guys,
Can anybody help the community with a way to install qBittorrent on WD My Cloud ?
Transmission was already installed by using this guide :
http://community.wd.com/t5/WD-My-Cloud/ ... d-p/619597
I think that it is possible to do the same with QB
Thanks
Re: qBittorrent for WD My Cloud
Posted: Thu Jul 10, 2014 10:44 am
by ciaobaby
Who knows, will you be providing us with a "My Cloud" drive to play with??
Re: qBittorrent for WD My Cloud
Posted: Thu Jul 10, 2014 11:13 am
by kpyhere
I can give access to one
Re: qBittorrent for WD My Cloud
Posted: Thu Jul 10, 2014 11:51 am
by sledgehammer_999
You can do "apt-get install qbittorrent-nox" in place of the corresponding transmission command.
This will install qbittorrent-nox (== no X == no GUI). Then you could launch it via "./qbittorrent-nox" but it will probably run with root priviliges and I don't know if it is a good idea.
You should install qbittorrent-nox in your local linux box. Play with it(to observe default values) and then transfer the same commands to your SSH session.
Re: qBittorrent for WD My Cloud
Posted: Thu Jul 10, 2014 5:23 pm
by kpyhere
That does not work unfortunately.
Re: qBittorrent for WD My Cloud
Posted: Thu Jul 10, 2014 8:20 pm
by sledgehammer_999
[quote="kpyhere"]
That does not work unfortunately.
[/quote]
You do realize that your answer is unhelpful, right?
Which command failed? What was the output in the terminal?
Re: qBittorrent for WD My Cloud
Posted: Fri Jul 11, 2014 7:30 am
by kpyhere
Code: Select all
login as: root
root@xxxxx password:
Linux WDMyCloud 3.2.26 #1 SMP Tue Jun 17 15:53:22 PDT 2014 wd-2.2-rel armv7l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Jul 11 10:19:06 2014 from xxxxxxxxx
WDMyCloud:~# apt-get install qbittorrent-nox
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
qbittorrent-dbg
The following NEW packages will be installed:
qbittorrent-nox
0 upgraded, 1 newly installed, 0 to remove and 298 not upgraded.
Need to get 0 B/1736 kB of archives.
After this operation, 3828 kB of additional disk space will be used.
Selecting previously unselected package qbittorrent-nox.
dpkg: warning: files list file for package 'libssh2-1:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libxau6:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'liblockfile1:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libkrb5-3:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libwrap0:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libtagc0:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libapr1:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libcap2:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libglib2.0-0:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libgphoto2-port0:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libpng12-0:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libtalloc2:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libevent-2.0-5:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libedit2:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libldap-2.4-2:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libavahi-client3:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libgphoto2-2:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libtag1c2a:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'liblua5.1-0:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libpkcs11-helper1:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libpcre3:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libdb5.3:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libavahi-common3:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libsensors4:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libx11-6:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libnfsidmap2:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libbsd0:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libavahi-common-data:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libjpeg8:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libnss-winbind:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libsasl2-2:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libsasl2-modules:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libcurl3:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libaprutil1-ldap:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libtirpc1:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libaprutil1:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libkrb5support0:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'librtmp0:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libpcap0.8:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libdevmapper1.02.1:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libexpat1:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libltdl7:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libkeyutils1:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libreadline5:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libantlr3c-3.2-0:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libasound2:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libxcb1:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libtdb1:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libxpm4:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libtag1-vanilla:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'liblzo2-2:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libogg0:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libaprutil1-dbd-sqlite3:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libfontconfig1:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libmagic1:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libk5crypto3:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libgssglue1:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libjson-c2:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libunistring0:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libwbclient0:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libfuse2:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libgssapi-krb5-2:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libparted0debian1:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libgd2-xpm:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libconfuse0:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libexif12:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libffi5:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libflac8:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libdbus-1-3:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libxml2:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libfreetype6:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libxdmcp6:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libpam-cap:armhf' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'libpam-winbind:armhf' missing; assuming package has no files currently installed
(Reading database ... 24581 files and directories currently installed.)
Unpacking qbittorrent-nox (from .../qbittorrent-nox_3.1.9.2-1_armhf.deb) ...
Processing triggers for man-db ...
Setting up qbittorrent-nox (3.1.9.2-1) ...
WDMyCloud:~# ./qbittorrent-nox
-bash: ./qbittorrent-nox: No such file or directory
WDMyCloud:~#
Re: qBittorrent for WD My Cloud
Posted: Fri Jul 11, 2014 10:40 am
by sledgehammer_999
Ooops my bad. You should issue "qbittorrent-nox" since this installed system-wide.
Re: qBittorrent for WD My Cloud
Posted: Fri Jul 11, 2014 3:47 pm
by kpyhere
Code: Select all
login as: root
WDMyCloud:~# qbittorrent-nox
-bash: qbittorrent-nox: command not found
Still not working.
Please note that my linux skills are not the best
Re: qBittorrent for WD My Cloud
Posted: Fri Jul 11, 2014 11:08 pm
by sledgehammer_999
How about these 2 commands:
1. cd /usr/bin/
2. qbittorrent-nox
Re: qBittorrent for WD My Cloud
Posted: Sat Jul 12, 2014 5:27 am
by kpyhere
I have tried those commands, but the qbittorrent can't be found.
I get the same error as the one from my previous post...
Re: qBittorrent for WD My Cloud
Posted: Sat Jul 12, 2014 10:23 am
by sledgehammer_999
Hmm probably the correct sequence is:
1. cd /usr/bin/
2. ./qbittorrent-nox
But if that also fails do this and copy the output here:
1. cd /usr/bin/
2. ls
Re: qBittorrent for WD My Cloud
Posted: Mon Jul 14, 2014 3:51 pm
by kpyhere
Thanks for the help.
I managed eventually to install it.
There was an issue with the new firmware. I have downgraded to v3 and everything runs smoothly.
Re: qBittorrent for WD My Cloud
Posted: Mon Jul 14, 2014 4:01 pm
by kpyhere
How can i set it now, to auto-start when the device is rebooted ?
Also, is it possible to change the cache in order to get full speed in downloads ?
Re: qBittorrent for WD My Cloud
Posted: Mon Jul 14, 2014 6:49 pm
by sledgehammer_999
Edit qBittorrent.conf. Usually it is found under /home/<username>/.config/qBittorrent
However, if I read it correctly you are running as root so you'll probably find it under /root/.config/qBittorrent
You should edit it to enable the webui and connect to it through a browser. You'll be able to change SOME options from there. There rest would need manual editing.
Then you need someone to tell you how to autorun programs under linux, how to open firewall ports etc. Or google.